Sectors : Businesses and Industries, City, Government, Land developer, Major industries

Characterization of wastewater and environmental monitoring under applicable regulations (CMM 2008-47 & RAVQ 1124)

Does your company’s water discharge comply with regulations? Generally speaking, municipalities have regulations aimed at regulating water discharges into the municipal sewer network, whether industrial, domestic or rainwater (for example CMM regulation 2008-47, RAVQ 1124 of Quebec City, etc.). Industries are particularly targeted by regulations regarding their volumes of water used as well as the characteristics of their discharge into the sewer. Also, under section 22 of the Environmental Quality Act, any operator of an industry likely to generate emissions or discharges to the environment must hold a certificate of authorization issued by the ministère de l’Environnement, de la Lutte contre les changements climatiques (MELCCFP). Occasionally, the certificate of authorization specifies the type of monitoring to be carried out and the sewer discharge standards to be respected.

Whether or not you have a certificate of authorization issued by the MELCCFP, we can help you check whether your discharges comply with current standards and thus correct problematic situations when necessary. The services we offer will allow you to avoid severe penalties that can accompany non-standard discharges.

CMM characterization

Avizo works with municipalities and businesses within the framework of the application and compliance with Regulation number 2008-47 of the Communauté métropolitaine de Montréal (CMM) on water sanitation and has developed over the years great expertise in carrying out characterization and monitoring analysis campaigns under the application of articles 9 and 10 (R.2008-47, a., 9 and 10).

Our team of technical professionals and engineers, members of the ordre des ingénieurs du Québec (OIQ), is located in the heart of the territory covered by the CMM where the requirements of the said regulation applies. We offer a turnkey service for the inspection of your installations, the carrying out of sampling campaigns, the production of characterization reports, the certification of the representativeness of the results and the development of corrective action plans if necessary.

The expertise developed over the course of numerous campaigns, varying from grab sampling to characterization composed of 24-hour periods, assures you that the work will be carried out with the intent of ensuring the representativeness of the results facing the realities of your environment, whether industrial, commercial or institutional.

Choosing Avizo means choosing an experienced team, located in close proximity and having the necessary material and technical capabilities to ensure that your realities are properly aligned with the regulations that apply.

Contact us

Contact our experts for a quote.

Request a Quote

Trust our Highly Qualified Team of Engineering Consultants.

Contact us now to benefit from our expertise in providing personalized and sustainable solutions for your water management concerns.

Request a Quote

Phone: 1-800-563-2005

Email: [email protected]

Montreal
25 Mozart Avenue E, Suite 201
Montreal H2S 1B1
Quebec
4495, Boulevard Wilfrid Hamel, Québec, local 240
Québec G1P 2J7
Laval
1994 Michelin Street
Laval H7L 5C2
Sherbrooke
1125 Cherbourg Street
Sherbrooke J1K 0A8
Drummondville
330 Cormier Street
Drummondville J2C 7L9
Granby
150 Saint-Jacques Street
Granby J2G 8V6

Contact our experts

Characterization of wastewater and environmental monitoring under applicable regulations (CMM 2008-47 & RAVQ 1124)

Complete this form so that our experts will contact you and offer assistance tailored to your situation.

Demande de soumission
Desired services
Sols, réhabilitation et valorisation
Natural Environments and Watercourses
Urban water
Gauging and Calibration of Measurement Equipment
Urban infrastructure and transport
Permits and Authorization

Flowmeter identification

Applicable regulations
Is it possible to vary the flow rate manually?
Is the measuring system located in an enclosed space?
Is it possible to provide us with a person who will help our technician during the job in a confined space?

Maximum file size: 2.1MB

Newsletter
Consent
This form is intended to collect the information necessary for us to provide you with a quality service, by giving you the information you request from us. To find out more, consult our privacy policy and protection of personal information page.